Order Products : sales@su-jiao.com
Prixene® EB004E22
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | POLYMAT |
| Trademark: | Prixene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Yeewbl_Prixene-EB004E22.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Prixene®EB004E22 Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures. This resin, when properly fabricated, shows an excellent combination of processability, stiffness and physical properties. This product does not contain slip nor antiblock additives. The features presented are good processability, high impact resistance, low density, good tenacity, and good complies with FDA. The product form is in pellets. The material fulfills the FDA regulation title 21.CFR177.1520 (c) 2.2. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.40 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD : 51 µm | 241 | MPa | |
| 1% Secant, TD : 51 µm | 241 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 51 µm | 13.1 | MPa | |
| TD : Yield, 51 µm | 13.8 | MPa | |
| MD : Break, 51 µm | 25.5 | MPa | |
| TD : Break, 51 µm | 21.4 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 51 µm | 200 | % | |
| TD : Break, 51 µm | 500 | % | |
| Dart Drop Impact (51 µm) | 110 | g | ASTM D1709A |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°, 50.8 µm, Blown Film) | 104 | ASTM D2457 | |
| Haze (50.8 µm) | 6.5 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEQUEL® E3000FR | LyondellBasell Industries | TPO (POE) | SEQUEL® |
| Moplen EP240T | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| MAJORIS DT 208 | AD majoris | PP, Unspecified | MAJORIS |
| OP - PBT 15GF-FR | Oxford Polymers | PBT | OP - PBT |
| TECHNYL® A 218 V25 BLACK 51 | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
