Hyflon® PFA P7310 Datasheet,PFA,Solvay Specialty Polymers-SHANGHAI SUSHENG

Message
Hyflon® PFA P7310 is a clear, semi-crystalline melt processable perfluorinated resin. It is designed for electrostatic powder coatings and is particularly recommended for use as a topcoat in antistick applications. Hyflon® PFA P7310 exhibits very low surface energy, very low coefficient of friction and excellent thermal and flame resistance Additionally Hyflon® PFA P7310 coatings show excellent smooth surface finish, outstanding antistick behaviour and can maintain performance over a wide temperature range. Main features of Hyflon® PFA P7310 include: Very low surface energy Excellent antistick behaviour Very low coefficient of friction Very good surface finish Outstanding thermal resistance

General Information
Features	Semicrystallization Low friction coefficient Thermal stability, good Excellent appearance
Uses	Coating application
Appearance	Clear/transparent
Forms	Powder
Processing Method	Coating

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.15	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg)	10 - 17	g/10 min	ASTM D1238
Average Particle Size ¹	25	µm	Internal method
Volume density	800	g/l	ASTM D1895

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	300 - 310	°C	ASTM D4591

Additional Information
Processing Hyflon® PFA P7310 is intended as a topcoat material to apply to primered substrates. It can be processed using normal electrostatic powder coating techniques. Generally the procedure involves substrate preparation, coating, baking and cooling. Hyflon® PFA P7310 can be used neat and without any further formulation. Several passes may be required to obtain the desired PFA load and build up coating thickness without defects. Substrate preparation, gun parameters such as voltage and both oven temperature and time must all be well controlled to achieve defect free coated items. Storage and Handling Hyflon® melt processable fluropolymer resins can be stored without shelf life issues when kept in a clean and dry area at ambient temperatures. Opened containers should be tightly resealed to prevent any contamination. Safety and Toxicology Before using Hyflon® melt processable fluropolymer resins consult the product Material Safety Data Sheet and follow all label directions and handling precautions. As with all fluoropolymer materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods. Packaging Hyflon® PFA P7310 is packaged in 10kg non returnable drums. Each drum has two bags liner made of polyethylene resin.

Additional Information

Processing Hyflon® PFA P7310 is intended as a topcoat material to apply to primered substrates. It can be processed using normal electrostatic powder coating techniques. Generally the procedure involves substrate preparation, coating, baking and cooling. Hyflon® PFA P7310 can be used neat and without any further formulation. Several passes may be required to obtain the desired PFA load and build up coating thickness without defects. Substrate preparation, gun parameters such as voltage and both oven temperature and time must all be well controlled to achieve defect free coated items. Storage and Handling Hyflon® melt processable fluropolymer resins can be stored without shelf life issues when kept in a clean and dry area at ambient temperatures. Opened containers should be tightly resealed to prevent any contamination. Safety and Toxicology Before using Hyflon® melt processable fluropolymer resins consult the product Material Safety Data Sheet and follow all label directions and handling precautions. As with all fluoropolymer materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods. Packaging Hyflon® PFA P7310 is packaged in 10kg non returnable drums. Each drum has two bags liner made of polyethylene resin.

Note Message
1 .	Laser diffraction

Category:	PFA , Perfluoroalkoxy
Manufacturer:	Solvay Specialty Polymers
Trademark:	Hyflon® PFA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Ye1vL7_Hyflon-PFA-P7310.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
POLYSTONE® P med	Röchling Engineering Plastics SE & Co. KG	PP Homopolymer	POLYSTONE®
Staramide RFB53U	Eurostar Engineering Plastics	Nylon 66	Staramide
ALTECH® PA6 A 1000/107	ALBIS PLASTIC GmbH	Nylon 6	ALTECH® PA6
Daplen™ EE103AEB	Borealis AG	TPO	Daplen™
DynaMix Lite™ 2244-GHI	Polymer Dynamix	Nylon 12	DynaMix Lite™