Order Products : sales@su-jiao.com
Precision Polymer N75L
| Category: | NBR , Acrylonitrile Butadiene Rubber |
| Manufacturer: | Precision Polymer Engineering Ltd. |
| Trademark: | Precision Polymer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YXRWNM_Precision-Polymer-N75L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Nitrile Butadiene Rubber (NBR), 65-75 °IRHD. Ultra-Low acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. To meet ASTM D2000/SAE J200 line call-out: MBF710, B34, F19. Specifically formulated for use in pure air systems. The low acrylonitrile content of this compound provides excellent resistance to mineral oil, alcohol, paraffin and low-aromatic petrol in sub-zero temperature applications. Not recommended for use with acetone, benzene, chlorinated solvents or high-aromatic petrol. Good water resistance but poor against ozone and weather. |
| General Information | |
|---|---|
| Features |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| IRHD Hardness | 70 | ASTM D1415, ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 12.0 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 280 | % | ASTM D412, ISO 37 |
| Compression Set | |||
| 100°C, 24 hr | 15 | % | ASTM D395B |
| 100°C, 24 hr 1 | 15 | % | ISO 815 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 70 hr) | -10 | % | ASTM D412, ISO 37 |
| Change in Ultimate Elongation in Air (100°C, 70 hr) | -22 | % | ASTM D412, ISO 37 |
| Change in IRHD Hardness in Air (100°C, 70 hr) | 3.0 | ASTM D573, ISO 188 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Maximum Operating Temperature | 135 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Low Temperature Resistance - Non-brittle after 3 minutes | -56 | °C | |
| Minimum Operating Temperature: -60°C (-76°F) |
| Note Message | |
|---|---|
| 1 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DEXFLEX® D60-UV | LyondellBasell Industries | TPO (POE) | DEXFLEX® |
| Generic CA | Generic | CA | Generic |
| Jamplast JPPCGP | Jamplast, Inc. | PC | Jamplast |
| POCAN® KU 2-7241 000000 | LANXESS GmbH | PBT | POCAN® |
| Durethan® DP AKV 30 FN00 000000 | LANXESS GmbH | Nylon 66 | Durethan® |
