Order Products : sales@su-jiao.com
Jampilen EP348U
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Jam Polypropylene Company |
| Trademark: | Jampilen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YWFrga_Jampilen-EP348U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Jampilen EP348U is a nucleated, antistatic formulated, very high melt flow rate heterophasic polypropylene copolymer. The product features excellent impact resistance, even at low temperatures. Jampilen EP348U is specifically designed for high speed thin-walled injection molding. The very high fluidity, the molecular design and specific formulation of Jampilen EP348U result in very easy processing, short cycle times, low shrinkage and minimal warpage. This allows a great design freedom and imports good dimensional stability of the molded items. Items made with this grade feature excellent mechanical properties over a wide temperature range and very good low temperature performance. The ductile brittle transition temperature is well below -40°C. To obtain the best results in Injection Molding, Jampilen EP348U processing temperature should not exceed 240-250°C. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 86 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 6.0 | % | ASTM D638 |
| Flexural Modulus | 1200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 35 | J/m | |
| 23°C | 70 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 100 | °C | ASTM D648 |
| Brittleness Temperature | > -40.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 148 | °C | ASTM D1525 1 |
| Accelerated Oven Ageing (150°C) | 360 | hr | ASTM D3012 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gloss (60°) | 65 | ASTM D2457 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 240 to 250 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PureTherm® 1003C | Tekni-Films, a div of Tekni-Plex | Film, PVC | PureTherm® |
| Sylvin 2946-75 Clear 8392 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TOTAL Polystyrene Crystal 1810 | TOTAL Refining & Chemicals | PS (GPPS) | TOTAL Polystyrene |
| Ultradur® B 4300 G2 FC | BASF Corporation | PBT | Ultradur® |
| RONFALIN® SAN 4501 GF35 | A. Schulman Europe | SAN | RONFALIN® |
