Order Products : sales@su-jiao.com
TECASON™ P XRO
| Category: | PPSU , Polyphenylsulfone |
| Manufacturer: | Ensinger Inc. |
| Trademark: | TECASON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YUYU4D_TECASON-P-XRO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ensinger Industries launches its new line of xray opaque, XRO series, thermoplastic shapes with TECASON™P XRO. A radio opacifer is added to the standard line of colored PPSU extruded rod for orthopedic sizing trials and other instrument devices allowing for clear visibility of the component on fluoroscopy and xray.This accommodates some of the new challenges created by minimally invasive and image guided surgery. TECASON™P XRO has been tested to the requirements of IS0 10993 for external communication devices intended for less than 24 hour contact with tissue, bone and dentin. These tes tsinclude: Maximization / Sensitization Testing, Cytotoxicity, Intracutaneous Test, Acute Systemic Toxicity Test and the Hemolysis Test. TECASON™ P XRO has been formulated to allow clear visibility of an instrument on fluoroscopy and xray during minimally invasive and image guided surgery. Thus providing an exceptional benefit to the user. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Water Absorption (23°C, 24 hr) | 0.33 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 23°C) | 123 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2000 | MPa | ASTM D638 |
| Tensile Strength (Yield, 23°C) | 68.9 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 50 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2100 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 80.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 210 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Promyde® B30 P2 HI | NUREL, S.A. | Nylon 6 | Promyde® |
| Nypel® RC6024 BK | BASF Corporation | Nylon 6 | Nypel® |
| Artenius XCEL M | Artenius | PETG | Artenius |
| Comai 664-3 BL | Comai Ltda | LLDPE | Comai |
| K-Prene GHT 65 | Technovinyl Polymers India Ltd. | TPE | K-Prene |
