Order Products : sales@su-jiao.com

NOVAPOL® HB-W747-A

Category:	HDPE , High Density Polyethylene
Manufacturer:	NOVA Chemicals
Trademark:	NOVAPOL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YTQfi6_NOVAPOL-HB-W747-A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

NOVAPOL® HB-W747-A is a High Density Polyethylene material. It is available in North America for blow molding.

Important attributes of NOVAPOL® HB-W747-A are:

Food Contact Acceptable

Good Processability

High Molecular Weight

Impact Resistant

Stabilized

Typical applications include:

Automotive

Containers

Food Contact Applications

Marine Applications

Tanks

General Information
Additive	Processing Stabilizer
Features	Food Contact Acceptable Good Impact Resistance Good Processability High Density High Molecular Weight
Uses	Automotive Applications Drums Fuel Tanks Marine Applications
Agency Ratings	FDA 21 CFR 177.1520(c) 3.2a
Forms	Pellets
Processing Method	Blow Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.946	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)	8.5	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance
100% Igepal, F50	> 1000	hr	ASTM D1693A
100% Igepal, F50	> 1000	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	23.0	MPa	ASTM D638
Tensile Elongation (Break)	830	%	ASTM D638
Flexural Modulus	1200	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (3.20 mm)	400	J/m	ASTM D256
Tensile Impact Strength	480	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -70.0	°C	ASTM D746

Resin Grade	Manufacturer	Category	Trademark
SCANAMID 6 B23^E F30	Polykemi AB	Nylon 6	SCANAMID 6
Hyundai EP PA66 LD460C	HYUNDAI EP Co., Ltd.	Nylon 66	Hyundai EP PA66
OTECH PVC PL1001-8 - Plenum Jacket	OTECH Corporation	PVC, Unspecified	OTECH PVC
Nylux 6/G20FL	KMI Group, Inc.	Nylon 6	Nylux
Durethan® AKV 35 H2.0 901510	LANXESS GmbH	Nylon 66	Durethan®