Order Products : sales@su-jiao.com
TOTAL Polyethylene CD-471
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | TOTAL Refining & Chemicals |
| Trademark: | TOTAL Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YOgYkG_TOTAL-Polyethylene-CD-471.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TOTAL Polyethylene CD-471 is a high density polyethylene material,. This product is available in North America,. The main features of TOTAL Polyethylene CD-471 are:
The typical application field of TOTAL Polyethylene CD-471 is: wire and cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.947 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.28 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| 10% Igepal | > 500 | hr | ASTM D1693B |
| 100% Igepal | > 1000 | hr | ASTM D1693C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 22.8 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 600 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 793 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 126 | °C | ASTM D3418 |
| CLTE - Flow | 1.8E-4 | cm/cm/°C | ASTM D696 |
| Additional Information |
|---|
| ASTM Cell Classification, ASTM D3350: 335440Elongation at Break, ASTM D638, Type IV, 2 in/min: >600% |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 193 - 216 | °C | |
| Cylinder Zone 2 Temp. | 193 - 216 | °C | |
| Cylinder Zone 3 Temp. | 193 - 216 | °C | |
| Cylinder Zone 4 Temp. | 193 - 216 | °C | |
| Cylinder Zone 5 Temp. | 193 - 216 | °C | |
| Melt Temperature | 204 | °C |
| Extrusion instructions |
|---|
| Vacuum Tank Water Temperature: 73°F |
| Note Message | |
|---|---|
| 1 . | Type 4, 51mm/min |
| 2 . | Type 4, 51mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom SC7-7006U | Spartech Polycom | PC | Spartech |
| Geon™ Vinyl Rigid Extrusion L9620 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| Lupox® TE5000GU | LG Chem Ltd. | PC+PBT | Lupox® |
| MAJORIS CFR269 - 1333 | AD majoris | PP, Unspecified | MAJORIS |
| LEXAN™ EXL1413T resin | SABIC Innovative Plastics | PC | LEXAN™ |
