Order Products : sales@su-jiao.com
Polifil® PE RP-LDPE
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | The Plastics Group |
| Trademark: | Polifil® PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YOB6fZ_Polifil-PE-RP-LDPE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polifil® RP-LDPE is a soft, tough material with high chemical resistance. LDPE remains flexible and retains impact strength at very low temperatures. High melt flow (low viscosity) grades are injection molded into products such as containers and lids. Low melt flow (high viscosity) grades are used in blown films for bags and construction, extruded sheeting and pipe, and lawn edging. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application. |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 3.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 52 | ASTM D1415 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 165 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 11.7 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 23°C | 15 | % | |
| Break, 23°C | > 300 | % | |
| Flexural Modulus - Tangent (23°C) | 207 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 9.65 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256 | |
| Gardner Impact (23°C, 12.7 mm) | > 22.6 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 71.1 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® CP-29992 | Teknor Apex Company | TPE | Monprene® |
| Adiprene® Duracast® S930 | Chemtura | PUR-Ester/MDI | Adiprene® Duracast® |
| Flontech® FT-CAR33-GR2-6 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| GPPC ABS D-100 | GPPC Chemical Co., Ltd. | ABS | GPPC ABS |
| Thermec N™ 4314R25T1H | Technical Polymers, LLC | PPA | Thermec N™ |
