Order Products : sales@su-jiao.com
Kingfa API-230
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Kingfa |
| Trademark: | Kingfa |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YMo8ET_Kingfa-API-230.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Kingfa API-230 is a Polypropylene material. It is available in Asia Pacific or North America. Important attributes of Kingfa API-230 are:
Typical application of Kingfa API-230: Automotive |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 1.4 to 1.6 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 85 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(23°C, Injection Molded) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C, Injection Molded) | 150 | % | ASTM D638 |
| Flexural Modulus 3(23°C, Injection Molded) | 1400 | MPa | ASTM D790 |
| Flexural Strength 4(23°C, Injection Molded) | 37.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.20 mm, Injection Molded | 40 | J/m | |
| 23°C, 3.20 mm, Injection Molded | 90 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.40 mm, Injection Molded | 120 | °C | |
| 1.8 MPa, Unannealed, 6.40 mm, Injection Molded | 60.0 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+12 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.20 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resiten® G10FR4 | ITEN INDUSTRIES | Phenolic | Resiten® |
| Niuk 20RN00 | Shanghai Niuk New Plastic Technology Co., Ltd. | ABS | Niuk |
| Geon™ HC 2160G | PolyOne Corporation | PVC, Flexible | Geon™ HC |
| Hifax TRC 1204P | LyondellBasell Industries | TPO (POE) | Hifax |
| Hostacom TRC 454N C11538 | LyondellBasell Industries | PP, Unspecified | Hostacom |
