Order Products : sales@su-jiao.com
Vikalloy IM90
| Category: | PMMA+PVC , Acrylic (PMMA) + PVC |
| Manufacturer: | Viking Polymers, LLC |
| Trademark: | Vikalloy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YIifdX_Vikalloy-IM90.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vikalloy IM90 is an acrylic acid (PMMA) PVC (PMMA PVC) material,. This product is available in North America, Europe or Asia Pacific region. The processing method is injection molding. The main features of the Vikalloy IM90 are:
|
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.47 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.20 - 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (3.18 mm) | 53.5 | MPa | ASTM D638 |
| Tensile Elongation (Break, 3.18 mm) | 98 | % | ASTM D638 |
| Flexural Modulus (3.18 mm) | 3100 | MPa | ASTM D790 |
| Flexural Strength (3.18 mm) | 75.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed, 3.18 mm) | 71.1 | °C | ASTM D648 |
| Additional Information |
|---|
| Specific Gravity, ASTM D792: 1.46 - 1.49 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 54.4 | °C | |
| Drying Time | 4.0 | hr | |
| Middle Temperature | 157 - 196 | °C | |
| Front Temperature | 157 - 196 | °C | |
| Processing (Melt) Temp | 196 - 207 | °C | |
| Mold Temperature | 32.2 - 60.0 | °C | |
| Back Pressure | 0.689 - 2.76 | MPa |
| Injection instructions |
|---|
| Drying is typically not necessary, however if the material is old or has been stored in moist conditions follow drying parameters listed. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ PP FR 7380-8001 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| Sylvin 2900-45 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| EVALENE® HDPE HF14462 | JG Summit Petrochemical Corporation | HDPE | EVALENE® HDPE |
| Grilon® TSGZ-15 | EMS-GRIVORY | Nylon 66/6 | Grilon® |
| HydroSlilp™ C | AdvanSource Biomaterials Corp. | PUR-Ether | HydroSlilp™ |
