Order Products : sales@su-jiao.com
Sinvicomp SIZ5306
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YHGtAt_Sinvicomp-SIZ5306.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| "Sinvicomp" SIZ 5306 is a wire & cable polyvinylchloride compound available in pellet form. SIZ 5306 provides good performance for insulation of electrical wires. |
| General Information | |
|---|---|
| Uses |
|
| Cable Type (BS 6746) |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.44 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 17.0 | MPa | IEC 811-1-1 |
| Tensile Elongation (Break) | 280 | % | IEC 811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Changes in mechanical properties after hot air aging test, 80°C, 168 hr 2 | IEC 811-1-2 | ||
| Tensile strength change | 10 | % | IEC 811-1-2 |
| Change in tensile elongation | 15 | % | IEC 811-1-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | 1.0E+14 | ohms·cm | BS 2782 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Loss of Mass - Oven Ageing Condition @ 80 ± 2°C for 7 days | 1.20 | mg/cm² | IEC 811-3-2 |
| Typical temperature profile for SINVICOMP compound is from 160°C to 170°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 150°CMixing zone: 160°C~165°CMetering zone: 165°C~170°CNozzle/Die Zone: 170°C |
| Note Message | |
|---|---|
| 1 . | @ 23°C |
| 2 . | @ 80 ± 2°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silplus® 60 HS | Momentive Performance Materials Inc. | Silicone Rubber, HTV | Silplus® |
| MOSTEN GH 001 | UNIPETROL RPA | PP Homopolymer | MOSTEN |
| DOW™ LDPE 4012 | The Dow Chemical Company | LDPE | DOW™ LDPE |
| KEBAFLEX® SG 65 A.01 | BARLOG plastics GmbH | TES | KEBAFLEX® |
| LUVOCOM® 1-0865 VP | LEHVOSS Group | Nylon 66 | LUVOCOM® |
