Order Products : sales@su-jiao.com
ROTOLENE® 93050-N
| Category: | LMDPE , Linear Medium Density Polyethylene |
| Manufacturer: | Polimeros Mexicanos s.a. de c.v. |
| Trademark: | ROTOLENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YHB0fx_ROTOLENE-93050-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Linear Medium Density Polyethylene Copolymer, U.V stabilized. Colors: Black USES: Polyethylene highest quality, for the manufacture of water tanks, containers, etc., excellent for doing integrated interior with foam, introducing maximum color consistency, having a fine finish outer layer of color. This product meet all requirements of the U.S. FDA as specified in 21 C.F.R. 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.937 | g/cm³ | ASTM D1505 |
| Bulk Factor | 0.33 to 0.39 | ASTM D1895 | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | 300 | hr | |
| 100% Igepal | > 1000 | hr | |
| Particle Size - 35 mesh | > 2.00 | % | ASTM D1921 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Impact (3.18 mm) | 200 | J/m | ARM |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pourability | 1500.00 to 2400.00 | g/10 min | ASTM D1895 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 18.6 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 12 | % | ASTM D638 |
| Flexural Modulus 2 | 689 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 55.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Evoprene™ CE 6187 | AlphaGary | TPE | Evoprene™ CE |
| Ecomann® Bioresin EM20000 | Shenzhen Ecomann Biotechnology Co., Ltd. | PHA | Ecomann® |
| Iupilon® LGH2230M | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| Lucky Enpla LPC1000 | Lucky Enpla Co LTD | PC | Lucky Enpla |
| LubriOne™ PC-000/10T NC008 | PolyOne Corporation | PC | LubriOne™ |
