DOW™ Electrical & Telecommunications DFDA-4850 NT

Category:	LDPE , Polyethylene Thermoplastic Start-up and Transition Material
Manufacturer:	The Dow Chemical Company
Trademark:	DOW™ Electrical & Telecommunications
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YG3IPu_DOW-Electrical-Telecommunications-DFDA-4850-NT.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
DFDA-4850 NT is a low density, thermoplastic, unfilled polyethylene compound designed for starting-up and shutting-down medium and high voltage (5 kV and higher) power cable insulation extruders. It has a high degree of cleanliness required for these applications. DFDA-4850 NT is a nominal 2.0 melt index, 0.92 density, high pressure LDPE resin that has been stabilized with an antioxidant system that is compatible with HFDB-4201 EC, HFDB-4201 SC and HFDB-4202 EC. Cleanliness Requirements DFDA-4850 NT is required to meet strict standards for cleanliness as established by The Dow Chemical Company for an unfilled, thermoplastic insulation purge-type compound. The product is tested to ensure a high level of cleanliness. Pellet samples are visually inspected and extruded tapes are scanned by an automatic inspection system in a class 10,000 clean room. The purity data is managed using an acceptance sampling plan which ensures that the product in the shipping container meets or exceeds the required cleanliness standards.

General Information
Additive	Antioxidation
Uses	Start-up Material Insulation Wire and cable applications Cleaning compound
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.920	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.0	g/10 min	ASTM D1238

Extrusion	Nominal Value	Unit
Melt Temperature	116 - 140	°C

Extrusion instructions
DFDA-4850 NT is a thermoplastic compound designed to be compatible with power cable insulation compounds produced by The Dow Chemical Company. Although DFDA-4850 NT is a thermoplastic material and can withstand higher extrusion melt temperatures than vulcanizable compounds, melt extrusion temperatures in the range of 240 to 280°F (116 to 140°C) are recommended. This melt temperature range is recommended to reduce the potential for premature crosslinking (or scorch) in the vulcanizable compound when transitioning to or from DFDA-4850 . Process modifications should not be required during transitions to or from the DFDA-4850 NT and HFDB-4201 EC, HFDB-4201 SC or HFDB-4202 EC.

Extrusion instructions

DFDA-4850 NT is a thermoplastic compound designed to be compatible with power cable insulation compounds produced by The Dow Chemical Company. Although DFDA-4850 NT is a thermoplastic material and can withstand higher extrusion melt temperatures than vulcanizable compounds, melt extrusion temperatures in the range of 240 to 280°F (116 to 140°C) are recommended. This melt temperature range is recommended to reduce the potential for premature crosslinking (or scorch) in the vulcanizable compound when transitioning to or from DFDA-4850 . Process modifications should not be required during transitions to or from the DFDA-4850 NT and HFDB-4201 EC, HFDB-4201 SC or HFDB-4202 EC.

Resin Grade	Manufacturer	Category	Trademark
WACKER SilGel® 611 A/B	Wacker Chemie AG	Silicone	WACKER SilGel®
Wellamid® 42LHN2-N	Wellman Engineering Resins	Nylon 6	Wellamid®
Trithene® TS 8090	Petroquimica Triunfo	LDPE	Trithene®
Fainplast PVC PM 80/A	Fainplast Compounds S.r.l	PVC, Flexible	Fainplast PVC
Fluon® PTFE PB2015	Asahi Glass Co., Ltd.	PTFE	Fluon®