Order Products : sales@su-jiao.com
KW Plastics KWR102-150-M10 BLK
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YBQq1E_KW-Plastics-KWR102-150-M10-BLK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Medium Density Polyethylene Post-Consumer Resin Extrusion CHARACTERISTICS Good impact resistance, good Flexibility, pre-colored black. |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.945 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.55 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 51 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 17.9 | MPa | ASTM D638 |
| Flexural Modulus | 586 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Polypropylene | < 10 | % | ASTM D5576 |
| Weight Loss on Heating (105°C) | < 0.10 | % | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6 8950 T | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| NuSil MED-4805 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| NuSil CV-2289 | NuSil Technology | Silicone | NuSil |
| ADPOLY EM-700 | Lotte Chemical Corporation | LLDPE | ADPOLY |
| Edgetek™ NN-50GF/000 | PolyOne Corporation | Nylon 66 | Edgetek™ |
