Order Products : sales@su-jiao.com

STARFLEX® P 7374

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	STAR Thermoplastic Alloys & Rubbers, Inc.
Trademark:	STARFLEX®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YA2Wd8_STARFLEX-P-7374.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
STARFLEX® P 7374 Elastomer is an easy processing 74 Shore A hardness material designed for a wide variety of applications. STARFLEX® P 7374 Elastomer is supplied in pelletized form ready for thermoplastic processing. STARFLEX® P 7374 Elastomer is a versatile product for use in injection molding, extrusion, blow molding and other thermoplastic fabricating techniques. Since STARFLEX® P 7374 Elastomer conducts heat well compared to polyolefins, molded parts cool quickly and relatively short cycle times are obtained. Scrap is 100 percent recyclable. The finished parts have sharp and well defined details.

Message

STARFLEX® P 7374 Elastomer is an easy processing 74 Shore A hardness material designed for a wide variety of applications. STARFLEX® P 7374 Elastomer is supplied in pelletized form ready for thermoplastic processing.
STARFLEX® P 7374 Elastomer is a versatile product for use in injection molding, extrusion, blow molding and other thermoplastic fabricating techniques.
Since STARFLEX® P 7374 Elastomer conducts heat well compared to polyolefins, molded parts cool quickly and relatively short cycle times are obtained. Scrap is 100 percent recyclable. The finished parts have sharp and well defined details.

General Information
Features	Fast Molding Cycle Good Processability Good Weather Resistance Recyclable Material
Uses	Rollers
Appearance	Natural Color
Forms	Pellets
Processing Method	Blow Molding Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.14	g/cm³	ASTM D792
Molding Shrinkage - Flow	1.5	%	ASTM D955

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	74		ASTM D2240

Injection	Nominal Value	Unit
Rear Temperature	193 to 204	°C
Front Temperature	204 to 216	°C
Nozzle Temperature	216 to 232	°C
Mold Temperature	26.7 to 65.6	°C
Injection Pressure	3.45 to 4.83	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.689 to 1.38	MPa

Resin Grade	Manufacturer	Category	Trademark
Queo™ 8203	Borealis AG	Plastomer	Queo™
Sylvin 8280-90 Natural	Sylvin Technologies Incorporated	PVC, Flexible	Sylvin
Tarnoform® 300 MW6	Grupa Azoty S.A.	Acetal (POM) Copolymer	Tarnoform®
Ferro PP TPP20AF70UL	Ferro Corporation	PP Homopolymer	Ferro PP
Halar® 902	Solvay Specialty Polymers	ECTFE	Halar®