Order Products : sales@su-jiao.com
TYLON® 2433HL
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Tyne Plastics LLC. |
| Trademark: | TYLON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Y4Mhli_TYLON-2433HL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Data was measured on natural colored test specimens. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.39 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.20 to 0.40 | % | ASTM D955 |
| Water Absorption (24 hr) | 1.5 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 125 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 193 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 8270 | MPa | ASTM D790 |
| Flexural Strength | 262 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 221 | °C | |
| 1.8 MPa, Unannealed | 213 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® A9945T | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| REVODE 110 | Zhejiang Hisun Biomaterials Co.,Ltd | PLA | REVODE |
| XANTAR® MX 1082 | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| Ad-Tech Polyester NO. 21 | Ad-Tech Plastic Systems Corp. | Polyester, TS | Ad-Tech Polyester |
| Daelim Po1y® PA-164V | DAELIM INDUSTRIAL CO., LTD. | PP Homopolymer | Daelim Po1y® |
