Order Products : sales@su-jiao.com
Matrixx FP63E43
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | The Matrixx Group, Inc. |
| Trademark: | Matrixx |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Y4FGrN_Matrixx-FP63E43.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Matrixx FP63E43 is a polyamide 6 (nylon 6) material, which contains a 43% glass fiber reinforced material. This product is available in North America,. The main characteristics of Matrixx FP63E43 are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.49 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.10 - 0.30 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 207 | MPa | ASTM D638 |
| Flexural Modulus - Tangent | 10300 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 210 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 202 | °C | ASTM D648 |
| RTI | 65.6 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 - 93.3 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 260 - 288 | °C | |
| Middle Temperature | 260 - 288 | °C | |
| Front Temperature | 260 - 288 | °C | |
| Processing (Melt) Temp | 260 - 293 | °C | |
| Mold Temperature | 82.2 - 93.3 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | < 0.345 | MPa | |
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Screw Speed: Slow to MediumDessicant dryer with -20°F dewpoint |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Medalist® MD-50288 | Teknor Apex Company | TPE | Medalist® |
| Edgetek™ RA-10GF-10CF/000 HI | PolyOne Corporation | PPSU | Edgetek™ |
| Pibiter® N400 NERO900 | SO.F.TER. SPA | PBT | Pibiter® |
| POLYFLON™ M-112 | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
| Sylvin 2987-75 Clear 8422 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
