Order Products : sales@su-jiao.com
Generic PUR-Ether/TDI
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Y48swT_Generic-PUR-Ether-TDI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PUR-Ether/TDI This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.04 - 1.21 | g/cm³ | ASTM D792 |
| -- | 1.08 - 1.18 | g/cm³ | ASTM D1505 |
| Apparent Density | 1.02 - 1.21 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow (23°C) | 1.2 - 1.3 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 47 - 95 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break, 23°C) | 220 - 700 | % | ASTM D638 |
| Compressive Strength (23°C) | 0.421 - 16.1 | MPa | ASTM D695 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain, 23°C | 1.61 - 35.5 | MPa | ASTM D412 |
| 200% strain, 23°C | 32.4 - 45.7 | MPa | ASTM D412 |
| 300% strain, 23°C | 2.52 - 48.3 | MPa | ASTM D412 |
| Tensile Strength | ASTM D412 | ||
| Yield, 23°C | 13.6 - 62.1 | MPa | ASTM D412 |
| Fracture, 23°C | 12.3 - 62.7 | MPa | ASTM D412 |
| 23°C | 20.1 - 52.1 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 180 - 590 | % | ASTM D412 |
| Tear Strength | |||
| 23°C | 26.3 - 196 | kN/m | ASTM D624 |
| Cracking | 15 | kN/m | ASTM D470 |
| Compression Set | 23 - 46 | % | ASTM D395 |
| Bayshore Resilience | 29 - 73 | % | ASTM D2632 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 - -62.8 | °C | ASTM D746 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life (23°C) | 0.88 - 10 | min | |
| Thermoset Mix Viscosity | 120 - 3290 | cP | ASTM D2393 |
| Demold Time | 5.0 - 77 | min | |
| Post Cure Time | 14 - 18 | hr |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 61.1 - 109 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PUR-Ether/TDIThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD 302 EM FR | RTP Company | PC | RTP |
| VITAMIDE® BW1XBK6468 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| ASTAMID™ MB3G6HS | Marplex Australia Pty. Ltd. | Nylon 6 | ASTAMID™ |
| Panlite® GN-3610L | TEIJIN LIMITED | PC | Panlite® |
| TOTAL Polypropylene Aceso® PPM R020 S01 | TOTAL Refining & Chemicals | PP Random Copolymer | TOTAL Polypropylene |
