Order Products : sales@su-jiao.com
CoolPoly® D8104
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Celanese Corporation |
| Trademark: | CoolPoly® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Y3zkC0_CoolPoly-D8104.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CoolPoly D series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows design freedom in applications previously restricted to ceramics. The D series is electrically non-conductive and can be used for its dielectric properties. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.48 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 31.9 | MPa | ISO 37 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 2.52 | MPa | ISO 37 |
| Tensile Elongation (Break) | 150 | % | ISO 37 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Heat | 1390 | J/kg/°C | ASTM E1461 |
| Thermal Conductivity | 1.3 | W/m/K | ASTM E1461 |
| Thermal Diffusivity | 0.00632 | cm²/s |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.500 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Rear Temperature | 180 to 205 | °C | |
| Middle Temperature | 190 to 215 | °C | |
| Front Temperature | 195 to 225 | °C | |
| Nozzle Temperature | 195 to 225 | °C | |
| Processing (Melt) Temp | 190 to 225 | °C | |
| Mold Temperature | 20.0 to 50.0 | °C | |
| Injection Pressure | 2.10 to 6.90 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 0.700 to 3.50 | MPa | |
| Back Pressure | 0.00 to 0.700 | MPa | |
| Screw Speed | 50 to 150 | rpm | |
| Cushion | 0.00 to 5.00 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Propafilm™ MLP80 | Innovia Films Ltd. | PP Alloy | Propafilm™ |
| RTP 700 MG 30 | RTP Company | HDPE | RTP |
| RTP 800 SI 4 | RTP Company | Acetal (POM) Copolymer | RTP |
| Multi-Pro® 3010 X | Multibase, A Dow Corning Company | PP, Unspecified | Multi-Pro® |
| Huafon HF-3H95RL | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
