Order Products : sales@su-jiao.com
SABIC® LLDPE MG200024
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Y3wTuo_SABIC-LLDPE-MG200024.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LLDPE MG200024 is a high flow linear low density polyethylene copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG200024 is in powder form. Application SABIC® LLDPE MG200024 is typically used for masterbatches with very high carbon black, titanium dioxide or pigment content in blow moulding, injection moulding and film extrusion applications. Since the resin is supplied in free flowing powder form, it can be used for masterbatch production where PE powders are used. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (Compression Molded) | 24.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant (Compression Molded) | 315 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 12.0 | MPa | |
| Break, Compression Molded | 8.50 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 450 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 540 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 94.0 | °C | ASTM D1525 1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP PCGR02 | Saudi Basic Industries Corporation (SABIC) | PP Random Copolymer | SABIC® PP |
| Sylvin 5134-65 Clear Green 3131 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TAISOX 3210 | Formosa Plastics Corporation | LLDPE | TAISOX |
| VITAMIDE® BT33 ST | A. Schulman Europe | Nylon 6 | VITAMIDE® |
| LOXIM 600 00 HB IM | LOXIM Industries Private Limited | PC+PBT | LOXIM |
