Order Products : sales@su-jiao.com
SEQUEL® E3400 UV NAT
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | SEQUEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Y33q6b_SEQUELE3400UVNAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sequel E3400 UV NAT fractional melt flow, high flexural modulus thermoplastic polyolefin (TPO) is typically used for thermoformed exterior or interior applications that require low-temperature toughness and dimensional stability. This extrusion-grade material exhibits enhanced melt strength for a wide thermoforming processing window. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density (23°C) | 1.12 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.60 | g/10 min |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength 1(Yield, 23°C) | 21.0 | MPa | |
| Flexural Modulus 2(23°C) | 2100 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow (-30 to 100°C) | 5.0E-5 | cm/cm/°C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® CP-32038G CLR | Teknor Apex Company | TPE | Monprene® |
| ULTEM™ 4211 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| APTIV® 1102 | Victrex plc | PEEK | APTIV® |
| INEOS HDPE J50-1000-181 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
| MAJ'ECO DP364MBS | AD majoris | Biodeg Polymers | MAJ'ECO |
