Telcar® TL-2417J NAT Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Telcar TL-2417J is a high performance thermoplastic elastomer designed specifically for extrusion coating of fibers and fabrics for a variety of industrial and consumer applications. Telcar TL-2417J is a high hardness, high density, flame retardant grade as an alternative to flexible PVC.

General Information
Features	High specific gravity High density Workability, good Adhesiveness Good liquidity Good coloring Good adhesion Good toughness High hardness Excellent appearance Flame retardancy
Uses	Industrial application Consumer goods application field Fabric coating
RoHS Compliance	RoHS compliance
Appearance	Natural color
Forms	Particle
Processing Method	Extrusion Extrusion coating

Physical	Nominal Value	Unit	Test Method
Density	1.08	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	28	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ISO 868
Shaw A, 1 sec	92	ISO 868
Shaw A, 5 seconds	90	ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ISO 37
Transverse flow : 100% strain	3.90	MPa	ISO 37
Flow : 100% strain	5.60	MPa	ISO 37
Tensile Stress			ISO 37
Transverse flow : Fracture	4.00	MPa	ISO 37
Flow : Fracture	9.30	MPa	ISO 37
Tensile Elongation			ISO 37
Transverse flow : Fracture	460	%	ISO 37
Flow : Fracture	380	%	ISO 37
Tear Strength			ISO 34-1
Transverse flow	56	kN/m	ISO 34-1
Flow	48	kN/m	ISO 34-1
Compression Set			ISO 815
22°C, 23 hr	41	%	ISO 815
70°C, 22 hr	64	%	ISO 815
90°C, 70 hr	81	%	ISO 815

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (125°C, 168 hr)	10	%	ISO 188
Change in Tensile Strain at Break in Air (125°C, 168 hr)	-34	%	ISO 188
Change in Shore Hardness in Air (Shao A, 125°C, 168 hr)	-3.1		ISO 188

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 206 sec^-1)	300	Pa·s	ASTM D3835

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	166 - 188	°C
Cylinder Zone 2 Temp.	171 - 193	°C
Cylinder Zone 3 Temp.	177 - 199	°C
Cylinder Zone 4 Temp.	182 - 204	°C
Cylinder Zone 5 Temp.	182 - 204	°C
Die Temperature	190 - 210	°C

Extrusion instructions
螺杆转速30 - 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Telcar®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	XzMitX_TelcarTL2417JNAT.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
STYRON™ 678E	Trinseo	PS (GPPS)	STYRON™
NANCAR® 1072CG	Nantex Industry Co., Ltd.	NBR	NANCAR®
Etinox® EF-0127	Ercros, S.A.	PVC, Rigid	Etinox®
LEXAN™ 172L resin	SABIC Innovative Plastics Europe	PC	LEXAN™
SD POLYCA™ CR3341T	Sumika Styron Polycarbonate Limited	PBT+PC+PET	SD POLYCA™