Order Products : sales@su-jiao.com

VECTOR® 4293A

Category:	SI , Styrene Isoprene Branched Copolymer
Manufacturer:	Dexco Polymers LP
Trademark:	VECTOR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	XxOdiz_VECTOR-4293A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

VECTOR 4293A
Styrene-Isoprene (SI)n Block Copolymer

Radial (SI)n (1) block copolymer.

Contains ~25% SI diblock copolymer.

Supplied as a dense pellet, dusted with talc.

VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information.

VECTOR 4293A styrene-isoprene radial copolymer is produced via proprietary anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is not formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite).

It is made with a patented coupling process that yields a polymer primarily with a 4-arm radial architecture. It is a high styrene, low viscosity product that can be formulated into hot melt adhesive systems having low viscosity, good heat resistance, and excellent specific adhesion to low energy surfaces such as polyolefins. Consequently, adhesive formulations based on VECTOR 4293A (SI)n are ideally suited for disposables applications as well as for specialty packaging and bookbinding end uses.

General Information
Features	Copolymer Food Contact Acceptable Good Adhesion High Heat Resistance Low Viscosity
Uses	Adhesives Packaging
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.938	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	1.1	g/10 min	ASTM D1238
Ash Content	0.3	wt%	ASTM D1416
Styrene Content	30.0	wt%	Internal Method

Additional Information	Nominal Value	Unit	Test Method
Diblock Content	24.0	wt%	Internal Method
Volatiles	0.3	wt%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 1 sec)	63		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Flow ¹(300% Strain)	2.76	MPa	ASTM D412
Tensile Strength - Flow ²(Yield)	20.7	MPa	ASTM D412
Tensile Elongation - Flow ³(Break)	1000	%	ASTM D412

Note Message
1 .	Tested on roll milled/compression molded plaques (0.035" thick). Tested in the machine direction.
2 .	Tested on roll milled/compression molded plaques (0.035" thick). Tested in the machine direction.
3 .	Tested on roll milled/compression molded plaques (0.035" thick). Tested in the machine direction.

Resin Grade	Manufacturer	Category	Trademark
RTP 283	RTP Company	Nylon 66	RTP
TOTAL Polystyrene Impact 3441	TOTAL Refining & Chemicals	PS (HIPS)	TOTAL Polystyrene
Next Nylon 6 Prime Series NGF2 20-01GY	Next Polymers Ltd.	Nylon 6	Next Nylon 6 Prime Series
FM® 680	Cytec Industries Inc.	PI, TS	FM®
EPLAMID 6 CBR 30 NC	EPSAN Plastik SAN. ve TiC. A.S.	Nylon 6	EPLAMID 6