Order Products : sales@su-jiao.com
Alathon® M5370RF
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Alathon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XtkmUa_AlathonM5370RF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALATHON® M5370RF is a natural, high density polyethylene copolymer resin designed for high-frequency coaxial and control cable primary insulation. Alathon M5370RF achieves a low dissipation factor at high frequencies, and provides high impact strength, stress crack resistance, excellent color, and good processability. For optimal performance in foamed insulation, Alathon M5370RF should be blended with Petrothene® NA217080 and a nucleating package. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.3 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 67 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 25.5 | MPa | ASTM D638 |
| Fracture | 24.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1700 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 1280 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 124 | °C | ASTM D1525 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 4.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Strength | 28 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 2.34 | ASTM D1531 | |
| Dissipation Factor (1 MHz) | 2.0E-5 | ASTM D1531 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 300 - 325 | °C | |
| Cylinder Zone 2 Temp. | 350 - 400 | °C | |
| Cylinder Zone 3 Temp. | 400 - 450 | °C | |
| Cylinder Zone 4 Temp. | 475 - 500 | °C | |
| Cylinder Zone 5 Temp. | 475 - 500 | °C | |
| Adapter Temperature | 475 - 500 | °C | |
| Melt Temperature | 475 - 500 | °C | |
| Die Temperature | 475 - 500 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU P995 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| Xuchuan XCS-3235DY | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Heraform® R1300 NAT | Radici Plastics | Acetal (POM) Copolymer | Heraform® |
| Kumho SBR 1712H | Korea Kumho Petrochemical Co., Ltd. | SBR, Emulsion | Kumho SBR |
| Tunhe PBT TH6080 | Xinjiang Blueridge Tunhe Chemical Industry Co.,Ltd | PBT | Tunhe PBT |
