Order Products : sales@su-jiao.com
SureSpec HP-350
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XtPCQl_SureSpec-HP-350.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HP-350 is a Polypropylene certified prime resin designed for injection molding of lightweight and thin-walled applications. HP-350 combines a good balance of high flow processability with high clarity, short cycling, excellent dimensional stability, good tensile strength and good surface finishing. HP-350 processing temperature is 215° to 235°C with mold at 20°-50°C. HP-350 complies with FDA regulation 21CFR 177.1520 and most international regulations concerning the use of Polypropylene in contact with food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.903 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 83 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 31.7 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 12 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 93.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 152 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 215 to 235 | °C | |
| Mold Temperature | 20.0 to 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEETEC LDPE XL610 | Lotte Chemical Corporation | LDPE | SEETEC LDPE |
| Trademark PE LLD2920G | Trademark Plastics Corporation | LLDPE | Trademark PE |
| Dugdale PVC Rigid Injection Molding Compound | Dugdale Plc | PVC, Rigid | Dugdale PVC |
| Elastocon® 8150B | Elastocon TPE Technologies | TPE | Elastocon® |
| Hostacom HRC 242D NAT | LyondellBasell Industries | PP Homopolymer | Hostacom |
