Order Products : sales@su-jiao.com
Pibiflex® 4010LC NATURALE
| Category: | TPC-ET , Thermoplastic Copolyester Elastomer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Pibiflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XpZo4I_Pibiflex-4010LC-NATURALE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TPC grade with low flexural modulus and low crystallinity |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Melt Volume-Flow Rate (MVR) (220°C/2.16 kg) | 16.0 | cm³/10min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 33 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 730 | % | ASTM D638 |
| Flexural Modulus | 56.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 155 | °C | ASTM D3417 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 20 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 3.0 | hr | |
| Rear Temperature | 180 | °C | |
| Middle Temperature | 210 | °C | |
| Front Temperature | 220 | °C | |
| Mold Temperature | 40.0 to 60.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® BGB30 BK45 | Ravago Group | Nylon 6 | Ravamid® |
| 3M™ Dyneon™ PTFE TF 1641 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE |
| Fainplast PVC FK 90/13 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| Ecotan B FM SB NAT | Soredi S.p.a. | Nylon 6 | Ecotan B |
| Plenco 02571 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
