Order Products : sales@su-jiao.com
Abstron TG3M
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Bhansali Engineering Polymers Limited |
| Trademark: | Abstron |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XnVxaY_Abstron-TG3M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Abstron TG3M is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by injection molding and is available in Asia Pacific. Typical application: Automotive. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 33 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 to 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 108 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 38.2 | MPa | ASTM D638 |
| Flexural Modulus 2(6.40 mm, Injection Molded) | 1860 | MPa | ASTM D790 |
| Flexural Strength 3(6.40 mm, Injection Molded) | 55.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 23°C, 3.20 mm, Injection Molded | 370 | J/m | |
| 23°C, 6.40 mm, Injection Molded | 290 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 4(1.8 MPa, Annealed, 6.40 mm, Injection Molded) | 90.0 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.20 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Type I, 5.0 mm/min |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | Annealed at 80°C for 2 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ MDPE NG 7525 | The Dow Chemical Company | MDPE | DOW™ MDPE |
| New-prene™ 8265N | Total Polymer Vision (Suzhou) Co., LTD | PP+EPDM | New-prene™ |
| alphalon™ 25 | Grupa Azoty ATT Polymers GmbH | Nylon 6 | alphalon™ |
| LUVOCOM® 1301-7470 | Lehmann & Voss & Co. | PPS, Linear | LUVOCOM® |
| LNP™ LUBRICOMP™ RP004 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
