Order Products : sales@su-jiao.com

Keliren® CPE402

Category:	CPE , Chlorinated Polyethylene
Manufacturer:	Hangzhou Keli Chemical Co., Ltd.
Trademark:	Keliren®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	XkZP00_Keliren-CPE402.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Keliren® Chlorinated Polyethylene(CPE) thermoplastic resins are widely used as impact modifiers in PVC extrusion and injection molding applications, especially in products such as siding, widow profiles and pipe. The low dosage levels of Keliren® resins with rigid PVC resins can significantly improve impact strength and also act as a processing aid. In addition to offering attributes such as good chemical resistance, excellent low temperature properties, high filler level acceptance and excellent compatibility with a broad range of formulation ingredients, Keliren® resins offer excellent resistance to weathering in a properly formulated compound. Application: Impact modifier in translucent applications Flame retardant Performance: High impact strength and good flame resistance

Message

Keliren® Chlorinated Polyethylene(CPE) thermoplastic resins are widely used as impact modifiers in PVC extrusion and injection molding applications, especially in products such as siding, widow profiles and pipe. The low dosage levels of Keliren® resins with rigid PVC resins can significantly improve impact strength and also act as a processing aid. In addition to offering attributes such as good chemical resistance, excellent low temperature properties, high filler level acceptance and excellent compatibility with a broad range of formulation ingredients, Keliren® resins offer excellent resistance to weathering in a properly formulated compound.

Application: Impact modifier in translucent applications Flame retardant

Performance: High impact strength and good flame resistance

General Information
Features	Flame Retardant Good Abrasion Resistance Good Chemical Resistance Good Weather Resistance High Impact Resistance Low Temperature Resistant
Uses	Additive

Physical	Nominal Value	Unit	Test Method
Chlorine Content	39.0 to 41.0	wt%	ISO 7725

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	< 57		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (Break)	> 8.00	MPa	ISO 37

Resin Grade	Manufacturer	Category	Trademark
Tarnoform® 500 GF8	Grupa Azoty S.A.	Acetal (POM) Copolymer	Tarnoform®
Formolene® 6520A	Formosa Plastics Corporation, U.S.A.	PP Impact Copolymer	Formolene®
Latamid 66 E21 K/30	LATI S.p.A.	Nylon 66	Latamid
Braskem PP D137.01	Braskem Europe GmbH	PP Impact Copolymer	Braskem PP
Sylvin 9600-55 Yellow 449	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin