Order Products : sales@su-jiao.com
Precision Polymer E50Q
| Category: | EPDM , Ethylene Propylene Diene Terpolymer |
| Manufacturer: | Precision Polymer Engineering Ltd. |
| Trademark: | Precision Polymer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Xgspdg_Precision-Polymer-E50Q.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Peroxide cured, Ethylene Propylene Terpolymer, 46-55 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Complies with FDA code of Federal regulations title CFR21 section 177.2600. Water and n-hexane tested. Also complies to the requirements of USP 25, NF20, 2002, Class 6. To meet ASTM D2000/SAE J200 line call-out M3CA507, A25, B35, EA14, F17. Excellent water and steam resistance with good compression set properties. Heat and chemical resistance is superior to that of sulphur cured EPDM. Not oil resistant. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| IRHD Hardness | 53 | ASTM D1415, ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 10.0 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 400 | % | ASTM D412, ISO 37 |
| Compression Set | |||
| 125°C, 22 hr | 30 | % | ASTM D395B |
| 125°C, 22 hr 1 | 30 | % | ISO 815 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (125°C, 70 hr) | 15 | % | ASTM D412, ISO 37 |
| Change in Ultimate Elongation in Air (125°C, 70 hr) | -15 | % | ASTM D412, ISO 37 |
| Change in IRHD Hardness in Air (125°C, 70 hr) | 5.0 | ASTM D573, ISO 188 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Maximum Operating Temperature | 150 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Resistance - Non-brittle for 3 minutes | |||
| -- | -40 | °C | ISO R812 |
| -- | -40 | °C | ASTM D2137 |
| Minimum Operating Temperature: -40°C (-40°F) |
| Note Message | |
|---|---|
| 1 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP EMI 331 G FR | RTP Company | PC | RTP |
| Tufpet PBT G2630 | Mitsubishi Rayon America Inc. | PBT | Tufpet |
| ULTEM™ UF5011S resin | SABIC Innovative Plastics Europe | PEI | ULTEM™ |
| Nypol® PA A3 G15 MEV15 CNZ0247 NR381 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| Huafon HF-3H80AL | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
