Order Products : sales@su-jiao.com
Delene 3580
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shanghai Lin Gen Rubber Materials Co., Ltd. |
| Trademark: | Delene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Xfdvgu_Delene3580.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Delene 3580 is a thermoplastic elastomer (TPE) material,. This product is available in the Asia-Pacific region and is processed by extrusion or injection molding. The main features of Delene 3580 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 2.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 7.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 250 | % | ASTM D412 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (2.0 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 - 90 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 190 - 250 | °C | |
| Injection Pressure | 40.0 - 60.0 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 170 - 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SWANCOR Epoxy 950 | SWANCOR IND. CO., LTD. | Epoxy | SWANCOR Epoxy |
| TARFLON™ NEO GG1920 | Idemitsu Kosan Co., Ltd. | PC | TARFLON™ |
| BESTPOM C13/01 | Triesa Plastics | Acetal (POM) Copolymer | BESTPOM |
| Hostacom CA199 | LyondellBasell Industries | TPO (POE) | Hostacom |
| Lucky Enpla LHLD1030 | Lucky Enpla Co LTD | PC | Lucky Enpla |
