Order Products : sales@su-jiao.com

MARPOL® LDC 710

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Marco Polo International, Inc.
Trademark:	MARPOL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	XcNLIM_MARPOL-LDC-710.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Recommended Applications: Flexible packaging, milk cartons, industrial papers, foil mounting, single-ply bags, pouch bags, board trays, fiber drums, corrugated boxes and fiberboard containers. Processing: Applied to paper, foil, cellophane, polyester film and other base stocks by conventional extrusion coating processes. The maximum recommended melt temperature is 625°F. MARPOL® LDC 710 is a high speed, lightweight-coating resin for use with paper, films and other base stocks. This resin can be extrusion coated at line speeds of 1,200 ft/min. or higher.

Message

Recommended Applications: Flexible packaging, milk cartons, industrial papers, foil mounting, single-ply bags, pouch bags, board trays, fiber drums, corrugated boxes and fiberboard containers.

Processing: Applied to paper, foil, cellophane, polyester film and other base stocks by conventional extrusion coating processes. The maximum recommended melt temperature is 625°F.

MARPOL® LDC 710 is a high speed, lightweight-coating resin for use with paper, films and other base stocks. This resin can be extrusion coated at line speeds of 1,200 ft/min. or higher.

General Information
Features	Fast Molding Cycle Food Contact Acceptable Good Flexibility
Uses	Coating Applications Foil Coatings Packaging Paper Coatings
Agency Ratings	FDA 21 CFR 176.170 FDA 21 CFR 177.1520
Processing Method	Extrusion Coating

Physical	Nominal Value	Unit	Test Method
Density	0.923	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	10	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	51		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	11.7	MPa	ASTM D638
Tensile Elongation (Break)	230	%	ASTM D638
Flexural Stiffness	215	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	95.0	°C	ASTM D1525

Resin Grade	Manufacturer	Category	Trademark
RTP 4003 A	RTP Company	PPA	RTP
Stanyl® TS300	DSM Engineering Plastics	Nylon 46	Stanyl®
TRISTAR® PC-10R-CL(V)	Polymer Technology and Services, LLC	PC	TRISTAR®
Chemlon® MDF4L	Teknor Apex Company (Chem Polymer)	Nylon 6	Chemlon®
Durethan® AKV 30 H3.0 000000	LANXESS GmbH	Nylon 66	Durethan®