Order Products : sales@su-jiao.com
DynaMix Lite™ 2244-T
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaMix Lite™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Xarq3w_DynaMix-Lite-2244-T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hollow Glass Bead Filled PA12 Features:
Applications:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.80 to 1.0 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 31.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 5.0 to 10 | % | ASTM D638 |
| Flexural Modulus | 1030 | MPa | ASTM D790 |
| Flexural Strength | 46.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 130 to 160 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 to 82.2 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Rear Temperature | 238 to 249 | °C | |
| Middle Temperature | 246 to 257 | °C | |
| Front Temperature | 254 to 266 | °C | |
| Nozzle Temperature | 260 to 271 | °C | |
| Processing (Melt) Temp | 260 to 266 | °C | |
| Mold Temperature | 37.8 to 65.6 | °C | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 40 to 70 | rpm | |
| Clamp Tonnage | 4.1 to 6.9 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bergamid™ A70 G/GK40 H Black | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Flontech® FT-BRR30-8 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Eastar™ GN119 | Eastman Chemical Company | PETG | Eastar™ |
| K-Bin Rigid PVC KBD-5037T-5 | K-Bin, Inc. | PVC, Rigid | K-Bin Rigid PVC |
| LONGLITE® TPEE 1163-201LL | CCP Group | TPEE | LONGLITE® TPEE |
