Order Products : sales@su-jiao.com
ISPLEN® PM 275 DV
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ISPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XYy7GP_ISPLEN-PM-275-DV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polypropylene copolymer compound, with 20% mineral fillers reinforced and medium melt flow rate. ISPLEN® PM275 DV shows good impact strength and a medium rigidity. The product is UV stabilised. APPLICATIONS
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.06 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 15 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | 0.90 to 1.0 | % | ISO 2577 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 62 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2500 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Yield | 23.0 | MPa | |
| Break | 18.0 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Yield | 3.5 | % | |
| Break | 31 | % | |
| Flexural Modulus | 2300 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -20°C | 2.0 | kJ/m² | |
| 0°C | 2.5 | kJ/m² | |
| 23°C | 4.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179 | ||
| -20°C | 2.5 | kJ/m² | |
| 0°C | 50 | kJ/m² | |
| 23°C | 110 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 86.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 60.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 147 | °C | ISO 306/A120 |
| -- | 73.0 | °C | ISO 306/B120 |
| Note Message | |
|---|---|
| 1 . | 150x100x3mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® LL4F 802-G | Marco Polo International, Inc. | LLDPE | MARPOL® |
| Veroplas K80 | PlastxWorld Inc. | Acrylic (PMMA) | Veroplas |
| Ferro PP LPP40BD23WH | Ferro Corporation | PP Homopolymer | Ferro PP |
| HIPOLEN P® MA 21 | HIPOL A.D. | PP Homopolymer | HIPOLEN P® |
| POLYFLAM® RABS 90350 UV5 | A. Schulman Europe | ABS | POLYFLAM® |
