Order Products : sales@su-jiao.com
Softflex® 7210
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Softflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XWY2cN_Softflex-7210.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Softflex® 7210 is a Thermoplastic Elastomer (TPE) product. It is available in North America. Typical application: Engineering/Industrial Parts. |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.889 to 0.899 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1 | ASTM D1238 | ||
| 200°C/5.0 kg | 88 to 100 | g/10 min | |
| 230°C/2.16 kg | 47 to 57 | g/10 min | |
| 235°C/1.0 kg | 7.0 to 13 | g/10 min | |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 3.18 mm | 1.6 to 1.8 | % | |
| Across Flow : 3.18 mm | 1.4 to 1.6 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 67 to 77 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 7.58 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 800 | % | ASTM D412 |
| Tear Strength | 40.3 | kN/m | ASTM D624 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Overmold Bonding | PP, PE |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stylac™ NF920 | Asahi Kasei Chemicals Corporation | ACS | Stylac™ |
| VENYL SWGB307H | AD majoris | Nylon 6 | VENYL |
| Daelim Po1y® TR147F | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| KW Plastics KW 308A | KW Plastics | PP Impact Copolymer | KW Plastics |
| ISPLEN® PM 474 AT | REPSOL | PP Copolymer | ISPLEN® |
