Order Products : sales@su-jiao.com
Eltex® MED PH19N630
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers Europe |
| Trademark: | Eltex® MED |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XWQCeT_EltexMEDPH19N630.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Low Density Polyethylene homopolymer for pharmaceutical extrusion coating & injection moulding Benefits & Features Eltex® MED PH19N630 is an LD-polyethylene produced in a high-pressure process intended for extrusion coating and injection moulding of soft and flexible packages for pharmaceutical products. Eltex® MED PH19N630 is produced according to good manufacturing practice
Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 47 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/50 | ||
| Yield | 9.00 | MPa | ISO 527-2/50 |
| Fracture | 10.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 550 | % | ISO 527-2/50 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 88.0 | °C | ISO 306/A |
| Melting Temperature (DSC) 1 | 108 | °C | Internal method |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MIDILENA III PPF401 | ROMPETROL PETROCHEMICALS S.R.L. | PP Homopolymer | MIDILENA III |
| Zeoforte® ZSC2295CX | Zeon Corporation | NBR | Zeoforte® |
| Borealis PE FS1470 | Borealis AG | HDPE | Borealis PE |
| Grivory® G 25 | EMS-GRIVORY | Nylon 6I/6T | Grivory® |
| POLYelast TPE RCZ350D UV4 | Polykemi AB | TPE | POLYelast |
