Order Products : sales@su-jiao.com

NuSil R-2630

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	XSa7GN_NuSil-R-2630.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Static Dissipative Comment: 7 ohm-cm, Low viscosity

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Static Dissipative

Comment: 7 ohm-cm, Low viscosity

General Information
Features	Electrically Conductive Fuel Resistant Low Viscosity
Uses	Aircraft Applications Electrical/Electronic Applications

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Black
Density	1.09	g/cm³
Viscosity	9.4	Pa·s
Curing Time (150°C)	0.50	hr
Pot Life	600	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	60
Tensile Strength	4.83	MPa
Tensile Elongation at Break	95	%
Tear Strength	6.13	kN/m
Electric Strength	0.39	kV/mm

Resin Grade	Manufacturer	Category	Trademark
tefanyl® VE VEEP 110	Mitsubishi Chemical Performance Polymers, Inc.	PVC, Flexible	tefanyl® VE
NEFTEKHIM PP 1551J (T30SW)	Nizhnekamskneftekhim Inc.	PP Homopolymer	NEFTEKHIM PP
Axiall PVC HHW-191	Axiall Corporation	PVC, Rigid	Axiall PVC
KEBAFLOW® LCP MX130	BARLOG plastics GmbH	LCP	KEBAFLOW®
Paryls® PES F2250	Youju New Materials Co., Ltd.	PESU	Paryls®