Order Products : sales@su-jiao.com
Gallonprene® GP520-7011
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| Trademark: | Gallonprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XMbmGd_Gallonprene-GP520-7011.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Gallonprene®GP520-7011 is a thermoplastic elastomer (TPE) product,. It can be processed by extrusion, profile extrusion or injection molding, and is available in Africa and the Middle East, Latin America or the Asia-Pacific region. Gallonprene®GP520-7011 application areas include engineering/industrial accessories, tools and hoses. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.928 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 2.6 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 23°C) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 8.00 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 700 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 210 - 230 | °C | |
| Middle Temperature | 220 - 240 | °C | |
| Front Temperature | 230 - 250 | °C | |
| Processing (Melt) Temp | 190 - 210 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Fast |
| Injection instructions |
|---|
| Processing Temperature Limit: 280°CInjection Pressure: HighBack Pressure: 20 to 50%Overmolding Parameters:Rear Temperature: 230 to 250°CCenter Temperature: 240 to 260°CFront Temperature: 250 to 270°CMelt Temperature: 190 to 210°CMold Temperature: 30 to 60°CProcessing Temperature Limit: 280°CInjection Pressure: HighInjection Speed: HighBack Pressure: 20 to 50% |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 - 180 | °C | |
| Cylinder Zone 2 Temp. | 170 - 190 | °C | |
| Cylinder Zone 3 Temp. | 180 - 200 | °C |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 303 TFE 20 SI 2 | RTP Company | PC | RTP |
| Mirakutoran® TPU E185 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| Elastollan® 1185 A HFFR | BASF Polyurethanes GmbH | TPU-Polyether | Elastollan® |
| Hostacom ERC 213N G62720 | LyondellBasell Industries | PP Copolymer | Hostacom |
| LNP™ COLORCOMP™ 325C compound | SABIC Innovative Plastics | PBT | LNP™ COLORCOMP™ |
