Order Products : sales@su-jiao.com
EverGlide® SG5920
| Category: | Nylon 46 , Polyamide 46 |
| Manufacturer: | Polymer Dynamix |
| Trademark: | EverGlide® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XM6BO0_EverGlide-SG5920.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RSI PA46 Compound Features:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 82.7 | MPa | |
| Break | 37.9 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 8.0 | % | |
| Break | > 25 | % | |
| Flexural Modulus | 2410 | MPa | ASTM D790 |
| Flexural Strength | 67.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 64 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 2.0 to 12 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 277 to 321 | °C | |
| Middle Temperature | 293 to 321 | °C | |
| Front Temperature | 304 to 321 | °C | |
| Nozzle Temperature | 277 to 316 | °C | |
| Processing (Melt) Temp | 277 to 321 | °C | |
| Mold Temperature | 76.7 to 121 | °C | |
| Injection Rate | Moderate-Fast | ||
| Screw Speed | 40 to 70 | rpm | |
| Clamp Tonnage | 4.1 to 6.9 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4009 UP | RTP Company | PPA | RTP |
| TORZEN® U3501 NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
| Cevian®-V 660SF | PlastxWorld Inc. | ABS | Cevian®-V |
| Clariant Nylon 6/6 66G43-L | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| KOPA® KN126 | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
