Order Products : sales@su-jiao.com
CERTENE™ LLI-5026G
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XLfb2F_CERTENE-LLI-5026G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLI-5026G is a certified prime, granular copolymer designed for easing blending with pigments, slip and antiblock additives and other materials making it an excellent base resin for masterbatch products. LLI-5026G complies with FDA regulation 21CFR 177.1520 (c) 3.1a and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 100% Igepal, Compression Molded, F50) | 5.00 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 15.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | 90 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 448 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 440 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -65.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 91.0 | °C | ASTM D1525 |
| Additional Information |
|---|
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PONACOM PE 4412 | Ponachem Compound GmbH | HDPE | PONACOM PE |
| RTP 601 FR | RTP Company | ABS | RTP |
| Kumho EPS SEPS N12 | Korea Kumho Petrochemical Co., Ltd. | PS (EPS) | Kumho EPS |
| Hytrel® RS 40F5 NC010 | DuPont Performance Polymers | TPC-ET | Hytrel® RS |
| Plexiglas® V052i | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
