Order Products : sales@su-jiao.com
BMC 880
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Bulk Molding Compounds, Inc. |
| Trademark: | BMC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XL1yVc_BMC-880.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BMC 880 is a medium strength, low shrink molding compound designed for outdoor applications. This material is UL Listed 94-V0/5V and is UL approved for outdoor use. It can be supplied in bulk or extruded in pre -weighted slugs. Typical applications are outdoor lighting fixtures and grill shelves. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.82 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (Compression Molded) | 1.0E-4 to 3.0E-4 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.15 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Barcol Hardness | 50 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 48.3 | MPa | ASTM D638 |
| Flexural Modulus (Compression Molded) | 12400 | MPa | ASTM D790 |
| Flexural Strength (Compression Molded) | 121 | MPa | ASTM D790 |
| Compressive Strength | 128 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 290 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | 260 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Arc Resistance | 185 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 5V | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 138 to 166 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melinex® 582 | DuPont Teijin Films U.S. | Polyester, TP | Melinex® |
| Witcom PC/ABS AS | Witcom Engineering Plastics B.V. | PC+ABS | Witcom PC/ABS |
| Ultramid® B3EG6 | BASF Corporation | Nylon 6 | Ultramid® |
| ABSCOM® F350 | Polymer Compounders Limited | ABS | ABSCOM® |
| FHR Polypropylene AP5325-HS | Flint Hills Resources, LP | PP Impact Copolymer | FHR Polypropylene |
