Order Products : sales@su-jiao.com
ESENTTIA 10R10C
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Polipropileno del Caribe S.A. |
| Trademark: | ESENTTIA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XHEsHF_ESENTTIA-10R10C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: Random copolymer polypropylene with very good optical properties and easy mold filling; good impact resistance; with clarify additive. Recommended for: High clarity injection molding housewares; injection molding general purpose applications where clarity is important. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm, Injection Molded) | 27.9 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, 3.20 mm, Injection Molded) | 14 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(3.20 mm, Injection Molded) | 1050 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 64 | J/m | ASTM D256A |
| Gardner Impact 5(23°C, 3.20 mm, Injection Molded) | 32.8 | J | ASTM D5420 |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type I, 50 mm/min |
| 3 . | Type I, 50 mm/min |
| 4 . | Type I, 1.3 mm/min |
| 5 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trexprene® D40NU | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| Ultrason® S 3010 | BASF Corporation | PSU | Ultrason® S |
| Desmopan® 445 | Covestro - PUR | TPU-Polyester | Desmopan® |
| INEOS LDPE 22G764 | INEOS Olefins & Polymers Europe | LDPE | INEOS LDPE |
| PLUSTEK PA803 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
