Order Products : sales@su-jiao.com
KRATON® G1652 M
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | X8k6bU_KRATON-G1652-M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
KRATON G1652 M is a translucent, linear triblock copolymer based on styrene and ethylene/butylene (SEBS) with a Styrene / Rubber ratio of 30/70. It is supplied from North America in the physical form identified below.
Kraton G1652 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | 5.0 | g/10 min | |
| Antioxidant Additive 1 | 0.030 to 0.10 | % | Internal Method |
| Polystyrene Content | 29 to 31 | % | Internal Method |
| Solution Viscosity - Toluene, 20%wt (25°C) | 400 to 530 | mPa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.60 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Styrene/Rubber ratio | 30/70 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 69 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 4.83 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 31.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 500 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PROTEQ™ C19UST32SR | Marplex Australia Pty. Ltd. | PP Copolymer | PROTEQ™ |
| Rilsan® HT CZM 30 BLACK TLD | Arkema | PPA | Rilsan® HT |
| VENELENE® 8407APUV | Poliolefinas Internacionales, C.A. (Polinter) | MDPE | VENELENE® |
| Ultramid® A3K BK00464 | BASF Corporation | Nylon 66 | Ultramid® |
| Novalloy-B B6508 | PlastxWorld Inc. | ABS+PBT | Novalloy-B |
