Order Products : sales@su-jiao.com
Paxon™ AL55-003
| Category: | HDPE, UHMW , High Density Polyethylene Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Paxon™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | X7CfGo_Paxon-AL55-003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AL55-003 is a blow molded grade high density polyethylene with good hardness and stress cracking resistance. |
| General Information | |
|---|---|
| Additive |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal) | 25.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 28.0 | MPa | ASTM D638 |
| Flexural Modulus | 1310 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 189 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Legal statement |
|---|
| 本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vyncolit® RX®1-501AN (Nylon) | Vyncolit N.V. | DAP | Vyncolit® |
| Baytec® SPR-066A | Covestro - PUR | PUR-Ether/MDI | Baytec® |
| Ebalta AH 110 / TG | Ebalta Kunststoff GmbH | Epoxy | Ebalta |
| Hostacom CB189FC/1 | LyondellBasell Industries | TPO (POE) | Hostacom |
| Perfactory® Photosilver | EnvisionTEC, Inc. | Acrylic, Unspecified | Perfactory® |
