Order Products : sales@su-jiao.com
Andur 6500-AP/Curene® 280
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | X766Tb_Andur-6500-AP-Curene-280.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| All properties based on Andur® 6500-5AP cured with Curene® 280 |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 92 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 23.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 270 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 9.10 | MPa | ASTM D412 |
| Tear Strength | |||
| -- 1 | 64.8 | kN/m | ASTM D624 |
| Cracking | 21 | kN/m | ASTM D470 |
| Compression Set | 31 | % | ASTM D395 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 4.0 | min | |
| Post Cure Time (23°C) | 72 | hr |
| Additional Information |
|---|
| Prepolymer NCO%: 7.6-8.2Grams Curene® 280 per 100 grams prepolymer: 49.4Rebound, %: 35Stoichiometry: 0.95Prepolymer Temperature, °F: 190-210Curene® 280 Temperature, °F: 158Post Cure Time, 212°F, hours: 16 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 107 | °C |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 103 CC FR UV | RTP Company | PP, Unspecified | RTP |
| Monprene® WR-12263 | Teknor Apex Company | TPE | Monprene® |
| AIE PBT 30G8 | Asia International Enterprise (Hong Kong) Limited | PBT | AIE PBT |
| ETILINAS HD6070UA | POLYETHYLENE MALAYSIA SDN BHD | HDPE | ETILINAS |
| ELASTOSIL® LR 3001/55 FR A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
