Category: | PP Homopolymer , Polypropylene Homopolymer |
Manufacturer: | Formosa Plastics Corporation |
Trademark: | TAIRIPRO |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | X6xRDm_TAIRIPRO-S1023.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
FCFC PP resin S1023 meets the requirements of FDA, RoHS and the certificates of environmental protection. |
General Information | |
---|---|
Features |
|
Agency Ratings |
|
RoHS Compliance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 23 | g/10 min | ASTM D1238 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Rockwell Hardness (R-Scale, 23°C) | 100 | ASTM D785 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength (Yield, 23°C) | 35.3 | MPa | ASTM D638 |
Tensile Elongation (Break, 23°C) | > 200 | % | ASTM D638 |
Flexural Modulus (23°C) | 1470 | MPa | ASTM D790A |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Unnotched Izod Impact (23°C, 3.18 mm) | 25 | J/m | ASTM D256 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Deflection Temperature Under Load (0.45 MPa, Unannealed, 6.35 mm) | 115 | °C | ASTM D648 |
Extrusion instructions |
---|
Screw Temp: 220-260°CMolding Temp: 220-240°CCasting Roll: 30°CCooling water Temperature: 50-60°C |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Sinpolene MBN7012 | Teknor Apex Asia Pacific PTE. LTD. | LDPE | Sinpolene |
Stat-Tech™ AS-15CF/000 | PolyOne Corporation | ABS | Stat-Tech™ |
MAJORIS DG157 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
POLYfill PPC TS6020 E20 | Polykemi AB | PP Copolymer | POLYfill |
Sarlink® TPV 24445N | Teknor Apex Company | TPV | Sarlink® TPV |