Order Products : sales@su-jiao.com
ISORENE™ AA7C1-1001
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | SABIC Innovative Plastics Europe |
| Trademark: | ISORENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | X5f4tP_ISORENE-AA7C1-1001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ISORENE AA7C1-1001 is a special compound designed to be used in co-injection molding or coextrusion with SAN, ABS, PBT, PC or blends of these materials. The value listed as Strain at Break, ISO 527, was tested in accordance with ISO 37. The value listed as Stress at Break, ISO 527, was tested in accordance with ISO 37. |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 74 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 5.90 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 500 | % | ISO 527-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% Strain | 3.20 | MPa | |
| 300% Strain | 4.30 | MPa | |
| Tear Strength | 25 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 70 hr | 40 | % | |
| 70°C, 22 hr | 80 | % | |
| 100°C, 22 hr | 90 | % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NYCOA Polyamide 2326 UV | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA Polyamide |
| BIOH™ Polyol X-0002 | Cargill Industrial Bio-Products | Biodeg Polymers | BIOH™ Polyol |
| CONTINUUM™ DGDA-2420 YL | The Dow Chemical Company | MDPE | CONTINUUM™ |
| Plaslube® PA6/6 GF27 SL2 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| Omnix® FC-4050 | Solvay Specialty Polymers | HPPA | Omnix® |
