Order Products : sales@su-jiao.com

KMI PP KM-599IB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	X30PHP_KMIPPKM599IB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KM-599IB is an ultra high flow impact PP resin for injection molding applications. It is reactor-made block PP, which exhibits high rigidity as well as excellent impact strength due to well-designed resin structure. In addition, it shows better shrinkage property than conventional impact PPs. It is suitable for the injection molding of large-scale articles, base-resin for PP compounds, and thin products. Characteristics: High flow ability: MI>100, reactor-made product Excellent balance between stiffness & imapct strength

Message

KM-599IB is an ultra high flow impact PP resin for injection molding applications. It is reactor-made block PP, which exhibits high rigidity as well as excellent impact strength due to well-designed resin structure. In addition, it shows better shrinkage property than conventional impact PPs. It is suitable for the injection molding of large-scale articles, base-resin for PP compounds, and thin products.

Characteristics:

High flow ability: MI>100, reactor-made product

Excellent balance between stiffness & imapct strength

General Information
Features	Block Copolymer Rigidity, high Impact copolymer Impact resistance, high High liquidity
Uses	Thin wall parts Composite
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	100	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	95		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	31.4	MPa	ASTM D638
Tensile Elongation (Break)	< 50	%	ASTM D638
Flexural Modulus	1770	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	39	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	127	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
POLYshine PBT D231 GF30	Polykemi AB	PBT	POLYshine
SLOVAMID® 66/6 GF 30 FRG 5 TS	Plastcom	Nylon 66/6	SLOVAMID® 66/6
Moplen T30SW	Shazand (Arak) Petrochemical Corporation	PP Homopolymer	Moplen
Zhongfa ABS GR-30	Yuyao Zhongfa Engineering Plastics Co. Ltd.	ABS	Zhongfa
LNP™ STAT-KON™ EE005E compound	SABIC Innovative Plastics	PEI	LNP™ STAT-KON™