Order Products : sales@su-jiao.com
SEETEC PP M1400
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | LG Chem Ltd. |
| Trademark: | SEETEC PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | X2ThQ2_SEETEC-PP-M1400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SEETEC M1400 is a heterophasic polypropylene copolymer for injection molding applications. SEETEC M1400 exihibits a high flowability and a good balance of stiffness and impact strength. SEETEC M1400 meets the FDA requirment in the code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 25.5 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 300 | % | ASTM D638 |
| Flexural Modulus 3 | 1200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 39 | J/m | |
| 23°C | 120 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 105 | °C | ASTM D648 |
| Vicat Softening Temperature | 150 | °C | ASTM D1525 4 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 28 mm/min |
| 4 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vibrathane® B602 | Chemtura | PUR-Ether/TDI | Vibrathane® |
| Unichem 6543A | Colorite Polymers | PVC, Unspecified | Unichem |
| Next Nylon 6 Prime Series NST-01NC | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Prime Series |
| DynaChar™ 2321 | Polymer Dynamix | PEBA-Ether | DynaChar™ |
| Plenco 04304 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
