Order Products : sales@su-jiao.com
Strator® B-6
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | EPIC Polymers |
| Trademark: | Strator® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Wzoqll_Strator-B-6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| STRATOR® B-6 is a Polyamide 6 (Nylon 6) product filled with 60% long glass fiber. It is available in Europe. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.69 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 0.20 | -- | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.8 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 22500 | 16500 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 255 | 195 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 2.0 | 2.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 17500 | -- | MPa | ISO 178 |
| Flexural Stress (23°C) | 360 | -- | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 30 | -- | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 100 | -- | kJ/m² | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 220 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 220 | -- | °C | ISO 75-2/A |
| CLTE - Flow (23°C) | 2.0E-5 | -- | cm/cm/°C | ISO 7991 |
| Thermal Conductivity | 0.35 | -- | W/m/K | ISO 22007 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+12 | -- | ohms | ASTM D257 |
| Electric Strength | 35 | -- | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 500 | -- | V | IEC 60112 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 240 to 280 | °C | |
| Middle Temperature | 250 to 290 | °C | |
| Front Temperature | 260 to 310 | °C | |
| Nozzle Temperature | 270 to 320 | °C | |
| Processing (Melt) Temp | < 320 | °C | |
| Mold Temperature | 80.0 to 130 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 4DUR® 9K23100 H | 4Plas | PBT | 4DUR® |
| Arlon® 38N | Arlon-MED | PI, TP | Arlon® |
| Daelim Po1y® LD-05 | DAELIM INDUSTRIAL CO., LTD. | LDPE | Daelim Po1y® |
| EPO-TEK® EE149-6 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| INSULCAST® MRTV 2 | ITW Polymers Coatings North America | Silicone Rubber, RTV-2 | INSULCAST® |
