Order Products : sales@su-jiao.com
ALCUDIA® HDPE M5206
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WzGmup_ALCUDIA-HDPE-M5206.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALCUDIA® M5206 is a low melt flow rate high density polyethylene with narrow molecular weight distribution. It offers good processing properties for production of monofilaments with very high tensile strength at break. TYPICAL APPLICATIONS ALCUDIA® M5206 gives very high tenacity monofilaments designed for top products of technical applications:
Recommended melt temperature range from 210 to 240°C. Processing conditions should be optimised for each production line. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 230°C/2.16 kg | 0.62 | g/10 min | ISO 1133 |
| 230°C/21.6 kg | 18 | g/10 min | ISO 1133 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 - 240 | °C |
| Extrusion instructions |
|---|
| Stretching Ratio: 8 to 12 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIBOCOMP® PA6 GF40 TS5 | EPIC Polymers | Nylon 6 | TRIBOCOMP® |
| Algoflon® F 5/S | Solvay Specialty Polymers | PTFE | Algoflon® |
| Apec® 1695 | Covestro - Polycarbonates | PC | Apec® |
| MAJORIS FN060X | AD majoris | PP Copolymer | MAJORIS |
| CALIBRE™ 301-22 | Sumika Styron Polycarbonate Limited | PC | CALIBRE™ |
